The plastic hollow wall anchor is a screw actuated hollow wall anchor for use in paneling, wallboard, and solid masonry. The plastic hollow wall anchor is available in 6 sizes to match the most common wall thicknesses of hollow base materials. In solid base materials, the anchor can be used by removing the outer wings.
Dimension | Anchor Size | |||||
Mini | Short | Medium | Long | Extra Long | Super Long | |
ANSI Drill Bit Size, dbit(in.) | 5/16 | 5/16 | 5/16 | 5/16 | 5/16 | 5/16 |
Minimum Screw Length (in.) | 1 | 1 1/4 | 1 1/4 | 1 1/2 | 1 3/4 | 2 |
Screw Size Range | No.6 -12 | No.6-12 | No.6-12 | No.6-12 | No.6-12 | No.6-12 |
Fange Size (in.) | 29/64 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 |
Embed. (Soid Materials) (in.) | 5/8 | 1 1/8 | 1 1/4 | 1 3/8 | 1 1/2 | 1 3/4 |
INSTALLATION
| | ||||
Drill 5/16” diameter hole through base material. Select the proper size Plastic hollow wall anchor based on the wall thickness. Squeeze the Plastic hollow wall anchor flat and push into the hole. | Tap the plastic hollow wall anchor through the wall until the flange is seated flush against the outer wall. | Position the fixture, insert the screw through the fixture into the plastic hollow wall anchor, and tighten until it feels secure. | Solid base materials - For installations in solid base materials, break off the outer wings. | Squeeze the inner wings flat, and insert the Plastic hollow wall anchor into the anchor hole. Insert the screw through the fixture and tighten. |