Nylon Nail Anchors

PRODUCT DETAILS

---

Nylon nail anchors are ideal for a wide variety of light load fastening in wood, hard board, plaster, metal, cinder  block, brick, skate, marble, plastic, tile, glass and concrete, It's unique design allows the nail to expand the  anchor uniformly in the hole. 1. The anchor body is manufactured from virgin nylon to withstand high impact or shock loads. And its great  tensile strength males it unusually resistant to vibration loads. 2. The nylon is resistant to chemicals, fungus, moisture and other atmospheric conditions. 3. Electrical and thermal insulating properties are excellent. Thermal resistance ranges from -40°~F + 170°~F. 4. The pin is made of high strength steel and heavily zinc plated for maximum corrosion resistance.

TECHNICAL SPECIFICATIONS

---

Item Code	Anchor Size	Box Qty	Master Qty
FFNA3161	3/16 X 1	100	10
FFNA3161112	3/16 X 1-1/2	100	10
FFNA1434	1/4 X 3/4	100	10
FFNA141	1/4 X 1	100	10
FFNA14112	1/4 X 1-1/2	100	10
FFNA142	1/4 X 2	100	10
FFNA143	1/4 X 3	100	10
FFNA144	1/4 X 4	100	10

Item Code	Anchor Size	Drill Size	Screw Size
FFNNAL530	5 X 30mm	05mm	3.5 X 38mm
FFNNAL540	5 X 40mm	05mm	3.5 X 48mm
FFNNAL550	5 X 50mm	05mm	3.5 X 58mm
FFNNAL640	6 X 40mm	06mm	4 X 48mm
FFNNAL660	6 X 60mm	06mm	4 X 64mm
FFNNAL680	6 X 80mm	06mm	4 X 88mm
FFNNAL860	8 X 60mm	08mm	5 X 65mm
FFNNAL880	8 X 80mm	08mm	5 X 85mm
FFNNAL8100	8X 100mm	08mm	5 X 105mm
FFNNAL8120	8 X 120mm	08mm	5 X 125mm
FFNNAL10100	10 X 100mm	010mm	7 X 110mm
FFNNAL10135	10 X 135mm	010mm	7 X 145mm
FFNNAL10160	10 X 160mm	010mm	7 X 170mm

INSTALLATION

---

Using the proper diameter bit,  drill a hole into the base material to a depth of at least 1/4"  deeper than the required embedment. The tolerances of the  drill bit used should meet the  requirements of ANSI Standard  B212.15. Blow the hole clean  of dust and other material.

Insert the anchor through  the fixture. Drive the nail into  the anchor body to expand  it. Be sure the head is seated firmly against the fixture  and that the anchor is at the  proper embedment. This  anchor is not recommended for use overhead.