YOU BUY 1% OF THE BUILDING MATERIALS, BUT WE ENSURE YOU 100% OF QUALITY ASSURANCE AND SERVICE COMMITMENT
 |
HEXIE ANCHOR
Blister Packing / Plastic Kits
Light Duty
Wood, Hard Board, Plaster, Metal, cinder, etc
Nylon nail anchors are ideal for a wide variety of light load fastening in wood, hard board, plaster, metal, cinder block, brick, skate, marble, plastic, tile, glass and concrete, It's unique design allows the nail to expand the anchor uniformly in the hole. 1. The anchor body is manufactured from virgin nylon to withstand high impact or shock loads. And its great tensile strength males it unusually resistant to vibration loads. 2. The nylon is resistant to chemicals, fungus, moisture and other atmospheric conditions. 3. Electrical and thermal insulating properties are excellent. Thermal resistance ranges from -40°~F + 170°~F. 4. The pin is made of high strength steel and heavily zinc plated for maximum corrosion resistance.
Item Code | Anchor Size | Box Qty | Master Qty |
FFNA3161 | 3/16 X 1 | 100 | 10 |
FFNA3161112 | 3/16 X 1-1/2 | 100 | 10 |
FFNA1434 | 1/4 X 3/4 | 100 | 10 |
FFNA141 | 1/4 X 1 | 100 | 10 |
FFNA14112 | 1/4 X 1-1/2 | 100 | 10 |
FFNA142 | 1/4 X 2 | 100 | 10 |
FFNA143 | 1/4 X 3 | 100 | 10 |
FFNA144 | 1/4 X 4 | 100 | 10 |
Item Code | Anchor Size | Drill Size | Screw Size |
FFNNAL530 | 5 X 30mm | 05mm | 3.5 X 38mm |
FFNNAL540 | 5 X 40mm | 05mm | 3.5 X 48mm |
FFNNAL550 | 5 X 50mm | 05mm | 3.5 X 58mm |
FFNNAL640 | 6 X 40mm | 06mm | 4 X 48mm |
FFNNAL660 | 6 X 60mm | 06mm | 4 X 64mm |
FFNNAL680 | 6 X 80mm | 06mm | 4 X 88mm |
FFNNAL860 | 8 X 60mm | 08mm | 5 X 65mm |
FFNNAL880 | 8 X 80mm | 08mm | 5 X 85mm |
FFNNAL8100 | 8X 100mm | 08mm | 5 X 105mm |
FFNNAL8120 | 8 X 120mm | 08mm | 5 X 125mm |
FFNNAL10100 | 10 X 100mm | 010mm | 7 X 110mm |
FFNNAL10135 | 10 X 135mm | 010mm | 7 X 145mm |
FFNNAL10160 | 10 X 160mm | 010mm | 7 X 170mm |
INSTALLATION
Using the proper diameter bit, drill a hole into the base material to a depth of at least 1/4" deeper than the required embedment. The tolerances of the drill bit used should meet the requirements of ANSI Standard B212.15. Blow the hole clean of dust and other material. |  | Insert the anchor through the fixture. Drive the nail into the anchor body to expand it. Be sure the head is seated firmly against the fixture and that the anchor is at the proper embedment. This anchor is not recommended for use overhead. |  |
Nylon nail anchors are ideal for a wide variety of light load fastening in wood, hard board, plaster, metal, cinder block, brick, skate, marble, plastic, tile, glass and concrete, It's unique design allows the nail to expand the anchor uniformly in the hole. 1. The anchor body is manufactured from virgin nylon to withstand high impact or shock loads. And its great tensile strength males it unusually resistant to vibration loads. 2. The nylon is resistant to chemicals, fungus, moisture and other atmospheric conditions. 3. Electrical and thermal insulating properties are excellent. Thermal resistance ranges from -40°~F + 170°~F. 4. The pin is made of high strength steel and heavily zinc plated for maximum corrosion resistance.
Item Code | Anchor Size | Box Qty | Master Qty |
FFNA3161 | 3/16 X 1 | 100 | 10 |
FFNA3161112 | 3/16 X 1-1/2 | 100 | 10 |
FFNA1434 | 1/4 X 3/4 | 100 | 10 |
FFNA141 | 1/4 X 1 | 100 | 10 |
FFNA14112 | 1/4 X 1-1/2 | 100 | 10 |
FFNA142 | 1/4 X 2 | 100 | 10 |
FFNA143 | 1/4 X 3 | 100 | 10 |
FFNA144 | 1/4 X 4 | 100 | 10 |
Item Code | Anchor Size | Drill Size | Screw Size |
FFNNAL530 | 5 X 30mm | 05mm | 3.5 X 38mm |
FFNNAL540 | 5 X 40mm | 05mm | 3.5 X 48mm |
FFNNAL550 | 5 X 50mm | 05mm | 3.5 X 58mm |
FFNNAL640 | 6 X 40mm | 06mm | 4 X 48mm |
FFNNAL660 | 6 X 60mm | 06mm | 4 X 64mm |
FFNNAL680 | 6 X 80mm | 06mm | 4 X 88mm |
FFNNAL860 | 8 X 60mm | 08mm | 5 X 65mm |
FFNNAL880 | 8 X 80mm | 08mm | 5 X 85mm |
FFNNAL8100 | 8X 100mm | 08mm | 5 X 105mm |
FFNNAL8120 | 8 X 120mm | 08mm | 5 X 125mm |
FFNNAL10100 | 10 X 100mm | 010mm | 7 X 110mm |
FFNNAL10135 | 10 X 135mm | 010mm | 7 X 145mm |
FFNNAL10160 | 10 X 160mm | 010mm | 7 X 170mm |
INSTALLATION
Using the proper diameter bit, drill a hole into the base material to a depth of at least 1/4" deeper than the required embedment. The tolerances of the drill bit used should meet the requirements of ANSI Standard B212.15. Blow the hole clean of dust and other material. | | Insert the anchor through the fixture. Drive the nail into the anchor body to expand it. Be sure the head is seated firmly against the fixture and that the anchor is at the proper embedment. This anchor is not recommended for use overhead. | |
