> Plastic Conical Anchor
> Plastic Toggle Anchor
> Plastic Hollow Wall Anchor
> Nylon Nail Anchors
> Cable Clips
> Speed Plug (Nylon)
> Fishlike Anchor (PE or Nylon)
> Split Ribbed Plastic Anchor
> Super Ribbed Plastic Anchor
> Extruded Plastic Plug
> Nylon Frame/Hammer Fixing
> Toggle Bolt
> Wedge Anchor
> Hollow Wall Anchor
> Wall Board Anchor
> Sleeve Anchor
> Stud Anchor
> Drop In Anchors
> Split Drive Anchors
> Heavy Duty Shield Anchor
> Tie Wire Anchor
> Blister Packing
> Plastic Box


  HOLLOW WALL ANCHOR

  DESCRIPTION
The hollow wall anchor is a sleeve type hollow wall anchor designed for use in base materials such as plaster, wall board, concrete block or hollow tile. Once the anchor has been set, the screw may be removed as often as necessary without affecting the anchor. • Allows for fixture and screw removal and re-anchoring
  SPECIFICATIONS
Item Code Body Length Size (mm) Inch Size Drill Hole (mm) Drip Range (mm) Screw Length (mm)
BAHW-405 M4X22 1/8-XS 8 Up-4 28
BAHW-413 M4X34 1/8-S 8 3-9 40
BLHW-419 M4X40 1/8-M 8 8-15 46
BLHW-424 M4X46 1/8-SL 8 3-20 53
BLHW-425 M4X34 1/8-L 8 16-21 53
BLHW-432 M4X53 1/8-ML 8 18-28 59
BLHW-438 M4X59 1/8-XL 8 34-38 66
BLHW-513 M5X37 3/16-E 9 6-13 44
BLHW-519 M5X50 3/16-S 9 3-16 57
BLHW-532 M5X63 3/16-L 9 14-32 70
BLHW-545 M5X76 3/16-XL 9 28-45 83
BLHW-613 M6X37 1/4-E 10 6-13 44
BLHW-619 M6X50 1/4-S 10 3-16 57
BLHW-632 M6X63 1/4-L 10 14-32 70
BLHW-645 M6X76 1/4-XL 10 28-45 83
BLHW-813 M8X37 12 6-13 44
BLHW-819 M8X50 12 3-16 57
BLHW-832 M8X63 12 14-32 70
BLHW-845 M8X76 12 8-45 83

Item No. Anchor Size (Inch) (mm) Drip Range (Inch) (mm)
BIHW-405 1/8XSD    M4x22 UP-1/4    UP-5
BIHW-413 1/8XSD    M4x34 1/8-1/2    3-12
BIHW-419 1/8XMD    M4x40 3/8-5/8    10-16
BIHW-424 1/8XSLD    M4x46 1/4-13/16    3-20
BIHW-425 1/8XLD    M4x46 5/8-1-1/4    16-24
  INSTALLATION
Drill a hole through the base material into the hollow area.The drive version of Hollow wall anchor can be driven directly into the wallboard.

Inset the hollow wall anchor and tap the head until the gripper prongs are embedded in the base material. Maintain pressure with the screwdriver while turning the screw until a definite resistance is felt, indication the hollow wall anchor is set.
For faster setting, use hollow wall anchor setting tool. Back screw head out 2-3 turns, slide the tool behind the screw head, then squeeze the tool to expand the hollow wall anchor. This tool fits all sizes.
To complete the installation, remove the screw, line up mounting hole of item to be fastened, re-insert screw and tighten.
 
Copyright © cn-anchor.com, All Rights Reserved. Design By hiprovide.com